Category: 7506-66-3

7506-66-3,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7506-66-3,cis-Hexahydro-1H-isoindole-1,3(2H)-dione,as a common compound, the synthetic route is as follows.

Cis-8-azabicyclo[4,3,0]nonane To a slurry of lithium aluminium hydride (17.1 g) in dry diethyl ether (375 ml) under a nitrogen atmosphere, cis-hexahydrophthalimide (23.0 g) in dry tetrahydrofuran (300 ml) was added over a two-hour period. The mixture was refluxed for 2.5 hours, cooled and treated very slowly with excess of water. The precipitate was filtered off and the filtrate was evaporated to yield the title compound as a viscous oil, which was used in the next step without purification.

The synthetic route of 7506-66-3 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Leo Pharmaceutical Products Ltd. A/S; US4181659; (1980); A;,
Indole alkaloid derivatives as building blocks of natural products from?Bacillus thuringiensis?and?Bacillus velezensis?and their antibacterial and antifungal activity study
Preparation of Indole Containing Building Blocks for the Regiospecific Construction of Indole Appended Pyrazoles and Pyrroles

7506-66-3, cis-Hexahydro-1H-isoindole-1,3(2H)-dione is a indole-building-block compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

7506-66-3, Under a nitrogen atmosphere, the temperature was controlled at 20 to 30 C. 300 mL of a three-necked flask was successively added with 300 mL of tetrahydrofuran and 24.0 g of zinc chloride. After 1 hour, 8.2 g of potassium borohydride was added, and stirring was continued for 1 hour. Then, 7.8 g of cis-hexahydrophthalimide was added, and the reaction was stirred for two hours. 2. OmL of concentrated sulfuric acid was added, the temperature was slowly raised, and the mixture was heated to reflux for two hours. 400 mL of toluene was added, and the mixture was distilled to an internal temperature of about 94 C, and refluxed for 3 hours. The distillation was continued at a temperature, and a portion of tetrahydrofuran was distilled off to an internal temperature of about 105 C to stop the distillation. After cooling to 30 C or less, 100 mL of 15% by mass hydrochloric acid was slowly added dropwise, and after the completion of the dropwise addition, the mixture was heated to distill off, and a part of the solvent was distilled off until the internal temperature reached about 107 C to stop. After cooling to below 30 C, 150 mL of 30% by mass sodium hydroxide was added dropwise to adjust the pH to 13-14. The steam was distilled, and the distillate was collected. The distillate was extracted with 3×100 mL of dichloromethane, and then dried over anhydrous sodium sulfate. The desiccant was filtered off, and the solvent was evaporated under reduced pressure to give 6.0 g of pale yellow transparent liquid,cis-perhydroisoindole

As the paragraph descriping shows that 7506-66-3 is playing an increasingly important role.

Reference：
Patent; Jiangxi Jimin Trustworthy Pharmaceutical Co., Ltd.; Jiangxi Jimin Trustworthy Group Co., Ltd.; Guo Linfeng; Wen Wanjiang; Peng Changchun; Zhang Keqin; He Pingqing; Li Yibao; (6 pag.)CN108752260; (2018); A;,
Indole alkaloid derivatives as building blocks of natural products from?Bacillus thuringiensis?and?Bacillus velezensis?and their antibacterial and antifungal activity study
Preparation of Indole Containing Building Blocks for the Regiospecific Construction of Indole Appended Pyrazoles and Pyrroles

7506-66-3,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7506-66-3,cis-Hexahydro-1H-isoindole-1,3(2H)-dione,as a common compound, the synthetic route is as follows.

Cis-8-azabicyclo[4,3,0]nonane To a slurry of lithium aluminium hydride (17.1 g) in dry diethyl ether (375 ml) under a nitrogen atmosphere, cis-hexahydrophthalimide (23.0 g) in dry tetrahydrofuran (300 ml) was added over a two-hour period. The mixture was refluxed for 2.5 hours, cooled and treated very slowly with excess of water. The precipitate was filtered off and the filtrate was evaporated to yield the title compound as a viscous oil, which was used in the next step without purification.

7506-66-3 cis-Hexahydro-1H-isoindole-1,3(2H)-dione 6992236, aindole-building-block compound, is more and more widely used in various fields.

Reference：
Patent; Leo Pharmaceutical Products Ltd. A/S; US4181659; (1980); A;,
Indole alkaloid derivatives as building blocks of natural products from?Bacillus thuringiensis?and?Bacillus velezensis?and their antibacterial and antifungal activity study
Preparation of Indole Containing Building Blocks for the Regiospecific Construction of Indole Appended Pyrazoles and Pyrroles

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7506-66-3,cis-Hexahydro-1H-isoindole-1,3(2H)-dione,as a common compound, the synthetic route is as follows.

7506-66-3, To the crude spiro quaternary ammonium hydroxide mixture (280g) was added Example 1 cis-dimethyl cyclohexane imide (84.8g) in MIBK (1272ml) suspension. Under vigorous stirring refluxing, the reaction system after water net, the reaction system temperature was lowered to 50 C-60 C, weighed DMAC (181 g) into the reaction mixture, continue to heat refluxing 7-10 hour. After completion of the reaction and the DMAC MIBK was distilled off, do not pay attention to the reaction system temperature above 135 C, above 135 C after distillation under reduced pressure to remove the DMAC and MIBK, in addition to the net after, the reaction liquid was boiled in boiling water 5- 10 minutes, filtered and cooled, this operation repeated 2-3 times to remove the reaction product mixture of inorganic salts. When, after the remaining material was added ethanol (400ml), at 20 C_40 C conditions, hydrogen chloride gas for 30 minutes to saturation, then refluxed for 30 minutes, concentrating the reaction solution, a large number of crystallization, cooling is cooled until crystallization , crude 175g. The precipitate was available in 95% ethanol was recrystallized as white needles after recrystallization of perospirone hydrochloride (134g). The total product yield was 69.95%, 99.85% purity liquid.

7506-66-3 cis-Hexahydro-1H-isoindole-1,3(2H)-dione 6992236, aindole-building-block compound, is more and more widely used in various fields.

Reference：
Patent; Yantai Besten Pharmaceutical Co., Ltd.; Bi, Haidong; Zhang, Yifang; (8 pag.)CN105669665; (2016); A;,
Indole alkaloid derivatives as building blocks of natural products from?Bacillus thuringiensis?and?Bacillus velezensis?and their antibacterial and antifungal activity study
Preparation of Indole Containing Building Blocks for the Regiospecific Construction of Indole Appended Pyrazoles and Pyrroles

7506-66-3,7506-66-3, cis-Hexahydro-1H-isoindole-1,3(2H)-dione is a indole-building-block compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Under a nitrogen atmosphere, the temperature was controlled at 20 to 30 C. 300 mL of a three-necked flask was successively added with 300 mL of tetrahydrofuran and 24.0 g of zinc chloride. After 1 hour, 8.2 g of potassium borohydride was added, and stirring was continued for 1 hour. Then, 7.8 g of cis-hexahydrophthalimide was added, and the reaction was stirred for two hours. 2. OmL of concentrated sulfuric acid was added, the temperature was slowly raised, and the mixture was heated to reflux for two hours. 400 mL of toluene was added, and the mixture was distilled to an internal temperature of about 94 C, and refluxed for 3 hours. The distillation was continued at a temperature, and a portion of tetrahydrofuran was distilled off to an internal temperature of about 105 C to stop the distillation. After cooling to 30 C or less, 100 mL of 15% by mass hydrochloric acid was slowly added dropwise, and after the completion of the dropwise addition, the mixture was heated to distill off, and a part of the solvent was distilled off until the internal temperature reached about 107 C to stop. After cooling to below 30 C, 150 mL of 30% by mass sodium hydroxide was added dropwise to adjust the pH to 13-14. The steam was distilled, and the distillate was collected. The distillate was extracted with 3×100 mL of dichloromethane, and then dried over anhydrous sodium sulfate. The desiccant was filtered off, and the solvent was evaporated under reduced pressure to give 6.0 g of pale yellow transparent liquid,cis-perhydroisoindole

7506-66-3 cis-Hexahydro-1H-isoindole-1,3(2H)-dione 6992236, aindole-building-block compound, is more and more widely used in various fields.

Reference：
Patent; Jiangxi Jimin Trustworthy Pharmaceutical Co., Ltd.; Jiangxi Jimin Trustworthy Group Co., Ltd.; Guo Linfeng; Wen Wanjiang; Peng Changchun; Zhang Keqin; He Pingqing; Li Yibao; (6 pag.)CN108752260; (2018); A;,
Indole alkaloid derivatives as building blocks of natural products from?Bacillus thuringiensis?and?Bacillus velezensis?and their antibacterial and antifungal activity study
Preparation of Indole Containing Building Blocks for the Regiospecific Construction of Indole Appended Pyrazoles and Pyrroles

7506-66-3, cis-Hexahydro-1H-isoindole-1,3(2H)-dione is a indole-building-block compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,7506-66-3

To the foregoing solution, under reflux, was added cis-cyclohexane-1,2-dicarboximide (10.6 g) portionwise over 10 minutes. The reaction mixture was heated to reflux for 3 hours. After cooling to 0 C., water (7 ml) was added followed by 4N sodium hydroxide (7.6 ml) and water (23 ml). The white suspension was stirred whilst warming to room temperature. The solid was removed by filtration then the filtrate dried (sodium sulphate) and evaporated to give a cream oil.

The synthetic route of 7506-66-3 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Merck Sharp & Dohme, Ltd.; US5618812; (1997); A;,
Indole alkaloid derivatives as building blocks of natural products from?Bacillus thuringiensis?and?Bacillus velezensis?and their antibacterial and antifungal activity study
Preparation of Indole Containing Building Blocks for the Regiospecific Construction of Indole Appended Pyrazoles and Pyrroles